Step 1: IMPORTANT! The Smart Scooter must not be plugged into the charger.

Step 2: Keep the iconBIT Smart Scooter flat and make sure that both halves are level to the surface.

Step 3: Hold the iconBIT Smart Scooter firmly in your hands, so that I can no longer move. Now press the "Power" button and keep it pressed (about 5 seconds) until the front LEDs start flashing you may hear another beep depending on the model.

Step 4: Wait for about 30 seconds, keeping the board level, you will see multiple flashing lights. Switch the iconBIT Smart Scooter off and on again.

Step 5: The calibration is now complete.